The LMSNT LiteMod™ Snoot was developed primarily for product photography as it provides intense local light control. Designed for the LiteMod™ System, the snoot requires the UMF LiteMod™ Unit Mainframe (sold separately) to attach to the front plate of your flash unit, and can be used in conjunction with the filters and gels.

The long, narrow snoot will put out a narrow beam of light that will directly illuminate a small surface. The pattern is a 20º circle, the same as the HG20 20º honeycomb grid. (Light loss is about 3.5 f-stops.)

LiteMod™ Accessory	Dimensions
UMF LiteMod™ Unit Mainframe	8.3125" square (width / height) x 5.5" (depth)
LMSNT LiteMod™ Snoot	8" square (width / height) x 7" (depth)
LMBD4 LiteMod™ Barndoors	collapsed: 9" square (width / height) x 1.5" (depth)
GELH Gel Holders	8.25" (width) x 18" (height) folds in half to 8.25" (width) x 9" (height)

UMF LiteMod™ Unit Mainframe: The LMSNT LiteMod™ Snoot requires the UMF LiteMod™ Unit Mainframe for use, sliding inside the front square holding slot on the mainframe.