The CyberSync™ System is a fully integrated 2.4 GHz radio remote system with multiple capabilities from simple remote firing of flash units to complete control, metering and display of complex 16-light studio systems. A complete system includes one transmitter (at camera position) and one receiver for each light in the setup. A minimum setup for triggering can be accomplished with one transmitter and one receiver placed on just one light in the setup (leaving any additional lights in the setup to fire via their built-in slave trippers).
Transmitters (all transmitters require a receiver)
- hot shoe-mounted transmitter for complete studio control (used on the camera)
- controls all parameters of up to 16 lights on 16 frequencies
- can store and retrieve complex lighting setups
- used to adjust and/or trip Paul C. Buff™ units with CSR+, CSRB+ or CSXCV receivers
- used to group, trigger and take meter readings of virtually any lights with CSR+, CSRB+ or CSXCV receivers
- one plus-model (CSR+ or CSRB+) receiver for each light in the setup (or one CSXCV trasnceiver for each DigiBee and/or Einstein unit in the setup) is recommended
- More Info...
- NEW second-generation trigger transmitter
- hot shoe-mounted transmitter with enhanced spring-loaded contact
- longer battery life and more common battery type for replacements
- for use with all CyberSync™ receivers
- fires at distances up to 350 feet
- More Info...
Receivers (all receivers require a transmitter)
- AC-powered receiver for wireless control
- wireless firing when used with the CST2 transmitter
- full adjustment when used with the Cyber Commander™
- More Info...
- battery-powered receiver for wireless control
- wireless firing when used with the CST2 transmitter
- full adjustment when used with the Cyber Commander™
- More Info...
- AC-powered receiver for wireless firing
- for use with the CST2 transmitter (not for use with the Cyber Commander™)
- can be used to trip most flashes
- More Info...
- battery-powered receiver for wireless firing
- for use with the CST2 transmitter (not for use with the Cyber Commander™)
- can be used to trip most flashes
- More Info...
- all-digital transmitting receiver (“transceiver”)
- for use with the Cyber Commander™ and CST2 transmitter
- for use with the DigiBee and Einstein flash units only
- More Info...
© PAUL C. BUFF, INC | About Us | Help Center | Privacy Policy | Site Map | Toll Free 1.800.443.5542 | Local 615.383.3982 | Contact Us