The items below arrive standard with each AlienBees flash unit (B400, B800, and B1600) and are sold separately for replacement needs only. The flashtube and modeling lamp are both user replaceable, each arriving with instructions for replacement.
- general use field reflector
- bright silver with a smooth finish
- 80° beam spread
- More Info...
- replacement standard long shipping cover
- black ABS protective shipping cover
- fits over the flashtube(s) and modeling lamp
- arrives with all AlienBees™ (B400, B800 and B1600) flash units
- arrives with White Lightning™ X-Series units
- may be used with retired White Lightning™ Ultra Series and UltraZAPs
- replacement modeling lamp for AlienBees™ (B400, B800 and B1600) flash units
- replacement modeling lamp for retired White Lightning™ UltraZAP units
- may also be used in X-Series units where lower wattage is desired
- 150 Watt bulb (standard Edison base)
- Note: While the 150W bulb arrives with each AlienBees unit, you can use our 100W (100 Watt bulb) or 60W (60 Watt bulb) for replacement if lower wattage is desired.
- replacement flashtube for:
- AlienBees™ B400, B800 and B1600 units
- White Lightning™ X-Series, Ultra Zap and Zap 1000 units
- single-ring, 14mm flashtube
- UV-coated and daylight-balanced at 5600K
- 250,000+ flash typical lifespan
- 15-foot sync cord
- 1/8-inch (3.5mm) mini to PC-connection
- arrives with AlienBees™ (B400, B800 and B1600) units
- arrives with Einstein™ E640 units
- arrives with LG4X™ remote controls
- More Info...
- down-angle 15-foot, 3-prong grounded power cord
- arrives with all AlienBees™ units
- down-angle head connection at flash unit
- may be used with all Paul C. Buff™ 120V standard flash units
- Note: While the DAUPC15 15-foot power cord arrives with each AlienBees™ unit, you can use our UPC25 (25-foot power cord) or UPC15 (standard 15-foot power cord) for replacement if a longer cord or standard cord is desired. For use with the Vagabond systems, we also offer the VM-UPC3-120V 3-foot power cord.
- replacement light stand mounting block for use with AlienBees™ and Einstein™ flash units
- all aluminium mounting block
- fits on light stands with brass studs up to 5/8-inch
The items below arrive standard with each AlienBees ABR800 ringflash unit and are sold separately for replacement needs only. The flashtubes (two half-circle tubes used in each ringflash unit) and modeling lamps (eight lamps used in each ringflash unit) are user replaceable, each arriving with instructions for replacement.
- replacement reflector for ringflash units
- arrives with the ABR800 AlienBees Ringflash
- More Info...
- EIGHT replacement modeling lamps for ABR800 ringflash units
- set of eight 10 Watt, 24 Volt modeling lamps (two-pin base)
- ONE replacement flashtube for ABR800 ringflashes
- one half-circle (two halves used in unit) 10mm flashtube
- daylight-balanced at 5600K
- 250,000 - 1,000,000 flash typical lifespan
- down-angle 15-foot, 3-prong grounded power cord
- arrives with AlienBees™ ABR800 Ringflash units
- down-angle head connection at flash unit
- may be used with all Paul C. Buff™ 120V standard flash units
- 12-inch short sync cord
- 1/8-inch (3.5mm) mini to PC-connection
- arrives with AlienBees™ ABR800 Ringflash units
- More Info...
- arrives with the AlienBees™ ABR800 ringflash units
- complete universal mounting bracket hardware set
- includes all hardware for camera, light stand, and tripod mounting
© PAUL C. BUFF, INC | About Us | Help Center | Privacy Policy | Site Map | Toll Free 1.800.443.5542 | Local 615.383.3982 | Contact Us