Our honeycomb grids for the
7AB/R 7-inch Silver Field Reflector are available in four sizes, taking the 80º beam spread on the 7-inch reflector down to 10º (HG10), 20º (HG20), 30º (HG30) or 40º (HG40). The grids can be used in both 7AB/R and the
UMF LiteMod™ Unit Mainframe.
The HGX4 set includes the HG7BAG carring bag and all four of the honeycomb grids available in this size: the HG10, HG20, HG30 and HG40 grids.
A single grid snaps directly into the recessed outer lip on the reflector (or mainframe). When mounting the grid, leaving the tab (with the beam width size label) sticking out allows you to use the tab to pull the grid out of the reflector when you are ready to remove it.
The HG7BAG is a padded, soft-side carrying bag that holds up to four 7-inch or 8.5-inch honeycomb grids. Four adjustable compartments provide secure, tidy storage for your grids when not in use and the convenient carrying handle allows for easy transportation and hanging.
Grid |
Compatible Reflector |
Beam Spread with Grid |
Coverage at 1-foot Distance |
Coverage at 5-foot Distance |
Coverage at 10-foot Distance |
HG10 |
7AB/R or UMF |
10° |
6 inches |
12 inches |
24 inches |
HG20 |
7AB/R or UMF |
20° |
12 inches |
24 inches |
48 inches |
HG30 |
7AB/R or UMF |
30° |
18 inches |
36 inches |
72 inches |
HG40 |
7AB/R or UMF |
40° |
24 inches |
48 inches |
96 inches |
8.5HG15 |
8.5HOR |
15° |
15 inches |
19.5 inches |
37.5 inches |
8.5HG30 |
8.5HOR |
30° |
19.5 inches |
37.5 inches |
73.5 inches |
11HG15 |
11LTR |
15° |
17.5 inches |
22 inches |
40 inches |
11HG30 |
11LTR |
28° *** |
22 inches |
40 inches |
76 inches |
18HG20 |
OMNI18R |
20° |
23 inches |
36 inches |
59 inches |
22HG15 |
22HOBD |
15° |
28.5 inches |
33 inches |
51 inches |
22HG30 |
22HOBD |
30° |
33 inches |
51 inches |
87 inches |
ABRHG20 |
10ABR/R |
20° |
15 inches |
27 inches |
51 inches |
GS1 |
7AB/R |
18° |
10.5 inches |
21 inches |
42 inches |
Note: The coverage measurement is the diameter (in inches or feet) of the beam circle.
*** with the 11HG30 in the 11LTR reflector, the grid maintains the same beam spread, but eliminates light spill outside of the 28º pattern
- one HG10 10º honeycomb grid
- one HG20 20º honeycomb grid
- one HG30 30º honeycomb grid
- one HG40 40º honeycomb grid
- one HG7BAG carring bag
Our 7-inch honeycomb grids are designed for use with the
7AB/R 7-inch Silver Field Reflector and the
UMF LiteMod™ Unit Mainframe. They may not be used with any other reflector.
With the
LiteMod™ system, the grids can be used in conjunction with gels/filters and the gel holder as well as the light-directing barndoors.
With the standard 7AB/R 7-inch reflector, the grids can also be used in conjunction with the light-directng barndoors and with gels/filters (though the UMF is required for use with the
GELH gel holders -
clips will be necessary for gel/filter use with just the reflector).
When a grid is in use, the umbrella hole is blocked and umbrellas, therefore, may not be used simultaneously.