Our honeycomb grids for the 8.5HOR 8.5-inch High Output Reflector are available in two sizes, taking the 45º beam spread on the 8.5-inch reflector down to 15º (8.5HG15) or 30º (8.5HG30).

The 8.5HGSET set includes both of the honeycomb grids available in this size: the 8.5HG15 and 8.5HG30 grids.

A single grid snaps directly into the recessed outer lip on the reflector. When mounting the grid, leaving the tab (with the beam width size label) sticking out allows you to use the tab to pull the grid out of the reflector when you are ready to remove it.

Grid	Compatible Reflector	Beam Spread with Grid	Coverage at 1-foot Distance	Coverage at 5-foot Distance	Coverage at 10-foot Distance
HG10	7AB/R or UMF	10°	6 inches	12 inches	24 inches
HG20	7AB/R or UMF	20°	12 inches	24 inches	48 inches
HG30	7AB/R or UMF	30°	18 inches	36 inches	72 inches
HG40	7AB/R or UMF	40°	24 inches	48 inches	96 inches
8.5HG15	8.5HOR	15°	15 inches	19.5 inches	37.5 inches
8.5HG30	8.5HOR	30°	19.5 inches	37.5 inches	73.5 inches
11HG15	11LTR	15°	17.5 inches	22 inches	40 inches
11HG30	11LTR	28° ***	22 inches	40 inches	76 inches
18HG20	OMNI18R	20°	23 inches	36 inches	59 inches
22HG15	22HOBD	15°	28.5 inches	33 inches	51 inches
22HG30	22HOBD	30°	33 inches	51 inches	87 inches
ABRHG20	10ABR/R	20°	15 inches	27 inches	51 inches
GS1	7AB/R	18°	10.5 inches	21 inches	42 inches

Note: The coverage measurement is the diameter (in inches or feet) of the beam circle.

*** with the 11HG30 in the 11LTR reflector, the grid maintains the same beam spread, but eliminates light spill outside of the 28º pattern

• one 8.5HG15 15º honeycomb grid
• one 8.5HG30 30º honeycomb grid

Our 8.5-inch honeycomb grids are designed for use with the 8.5HOR 8.5-inch High Output Reflector. They may not be used with any other reflector.

When a grid is in use, the umbrella hole is blocked and umbrellas, therefore, may not be used simultaneously.